How and from what are parquet mosaics made?

Parquet mosaic, which we can use in our homes, apartments and even in public buildings, allows us to create interesting patterns. Parquet mosaic of good quality is made of oak, ash, beech or maple. This is a very versatile material with a small thickness and at the same time high strength, which looks great in various interiors, therefore it has been very popular for many years. How does the parquet mosaic fit?Patterns and method of laying parquet mosaic
To begin with, how does parquet mosaic differ from parquet ? The parquet plank usually has a thickness of about 20 mm, whereas the thickness of the mosaic element rarely exceeds 10 mm. Mosaic elements - the so–called slats - they are thinner and shorter, and they do not have the groove-ridge connection that parquet slats are equipped with. Boards, otherwise called formats, are made of slats glued with a special mesh or paper. Theoretically, laying a parquet mosaic is not much different from laying a conventional parquet, but if we want to get a more interesting pattern than a popular chessboard, then the work associated with pruning and connecting individual parts will have to be done much more. When laying parquet mosaics, it is necessary to remember several important rules:mosaic tiles should be glued to a well-cleaned (preferably with a vacuum cleaner), dry and smooth surface,
the evenness of our base is checked with a long alcohol level, if it is necessary to eliminate irregularities, then it is best to use a self-leveling solution for this purpose according to the instructions,
if there is a warm floor in the room, then it should be turned off 48 hours before the start works (we turn it back on no earlier than four days after the mosaic is laid),
we use only glue intended for fixing parquet mosaics; apply glue with a notched trowel,
plan the next stages of work in such an order that you do not walk on the already glued sections of the mosaic before the glue dries.
Other works related to parquet mosaic
In addition to laying parquet mosaics, we are also waiting for polishing and varnishing. Before starting work, wait a few days until the glue is completely dry. The first coat of varnish is best applied with a wide brush. When the varnish dries, wipe it with a fine-grained sponge, and then clean the floor from dust. Then apply two more coats of varnish., leaving each to dry completely according to the instructions on the product packaging. Finally, it is best to apply a polish intended for varnished parquet to the mosaic. To finish the parquet mosaic on the walls, you can use wooden slats or skirting boards that will mask the deformation seams. Our Top online casino list will help you choose a site to play for real money.